TOP INJEKT 70 is a two part system is solvent-free, low viscosity high compressive strength resin based system designed to form a strong permanent bond and seal in cracks in dry, damp and wet concrete
Used to form bowl-shaped sealing layers around construction, since it adhere well to sand and concrete (wet or dry).
Even underwater, it provides very effective sealing, bonds with the above sealing materials and sealing foils.
TOP INJEKT 30 is a two parts solvent-free, low viscosity hydrophobic polyurethane based injection system when mixed in the proportions supplied it reacts rapidly with water to form a foam barrier.
TOP Acrylic Gel is water based elastic acrylic gel with a very low starting viscosity. Due to its low starting viscosity, it can be injected into substrates with very fine pores. It is a multicomponent, water-swelling-capable hydrogel based on acrylate or methacrylate with very good mechanical properties, especially with an extremely high elongation.
TOP Acrylic Gel can be used for waterproofing buildings below grade by curtain injection, for injection into brick or masonry to seal the mortar joints..
Excellent penetration capacity due to water like viscosity, giving instant filling of injection hose and the joint as well as hairline cracks and capillaries.
TOP INJEKT 70 HSR is a two part system is solvent-free, low viscosity high compressive strength resin based system designed to form a strong permanent bond and seal in cracks in dry, damp and wet concrete.
1. Low viscosity allows penetration into fine cracks.
2. Good adhesion to dry/wet substrates.
3. High tensile strength, withstands high hydrostatic pressure.