TOP CRETE 66 is a ready-mix High Performance, Flowable Structural Micro Concrete is a pourable repair mortar designed for reinstating horizontal concrete surfaces damaged through concrete spalling and other chemical or mechanical causes, Top Crete 66 exhibits superior flow characteristics and is capable of being applied in thicknesses of 20mm to 200mm.
TOP CRETE 80 is a ready-mix and non-shrinkage cement base dry powder, provides smooth level surfaces with highly consistent repair mortar for special purpose concrete and masonry repairs. And due to adhesive materials in it, it makes an excellent adhesion to most common substrate for vertical and horizontal surface, also provides waterproofing properties.
TOP SBR is used for concrete/plaster repairs, waterproofing treatment in basement, roof, underground and overhead reservoir, fixing of bricks, tiles, copings etc.
TOP SBR is a styrene butadiene polymer latex admixture that is designed as an integral adhesive for cement bond coats, mortars and concrete to improve bond strength and chemical resistance.
Strength of adhesion to the base is distinctly improved allowing structural bonds between existing substrate and fresh mortar.
Non shrink cementitious grout for structural grouting of column base plates, machine base plates, anchor rods, bearing plates, etc.
(Fast Setting Compound for Running Water Stopper)
TOP PLUG is a fast setting ready to use hydraulic compound which stops running water instantly. TOP PLUG sets in 1 to 3 minutes depending on temperature and the surface to which it is applied.
Stops active water or seepage under pressure through joints, cracks and holes in concrete or masonry,.
TOP Grout EP is a solvent free three component system consisting of Resin, Hardener and specially graded inert fillers. It is a low exothermic material to suit for injection grouting where long working time is needed, to produce a high viscosity flowable grout suitable for voids of 50-175mm and for grouting at high ambient temperatures up to 50°.
TOP Grout EP is used for structural anchoring of bolts, inserts and reinforcement. Deep foundation grouting, transport and crane rail anchoring/grouting, high strength support of rotating machinery, support of mobile equipment, precision grouting of mining equipment and structural concrete repairs.
TOP Grout LV is a two component solvent free crack injection material composed of very low viscous liquid epoxy resin & hardener system. It is designed for injecting into narrow gaps, cracks and voids ranging from 0.1mm to 10mm.
TOP Grout LV is used for injecting into cracks, beams, columns, walls and structures honeycombs and cavities in concrete structures. It can also be used for grouting base plates with very narrow gaps, permanent bonding solution for concrete cracks.
TOP Flowcrete is a powdered admixture for use in cementitious grouts and concrete. It is formulated to produce improved grout quality and increased durability, whilst overcoming problems of settlement and plastic shrinkage using a gaseous expansion mechanism.
TOP Flowcrete should be used as a grout admixture for all cementitious mixes where restrained expansion is required. Typical uses are under-plate and bed grouting, space grouting, duct grouting and anchor bolt fixing.